|
|
Enter
the quantity of each item that you want to purchase.
Press the ADD button to place it in
your Shopping Cart. |
Description
of Item
Item
Number
 |
Price
|
Qty
to
Order |
Add
Item |
| N
Scale Diesel Sound Decoders |
Prices
shown on this page are for MRC Decoders only. Locos are
NOT included. |
.GIF)
You
don't need DCC on your layout to enjoy N scale
sound!
Click on MRC Logo just above for details ... |
Plug
'n Play Sound Board - click on photo for link to InterMountain
FP-7's |
Plug
'n Play Sound Board - Atlas SD50, SD60, SD60M Locos |
Plug
'n Play Sound Board - Kato PA. Click on photo for link
to Alco PA page. |
- MRC
surges forward with another miracle of N-Scale decoder
engineering: with no connectors, no wiring, no machining,
no “dremeling”… the easiest decoder
installation possible. N-Scale railroaders can install
this one piece sound decoder/speaker combination that
replaces the factory installed printed circuit board,
by simply removing the loco body, unclipping the factory
unit, and dropping in the 1644 decoder.
- MRC’s “Brilliance™” sound,
miniaturized to a single drop-in decoder with board
mounted super-fidelity speaker, is virtually “plug ‘n
play”. Just imagine… all 28 NMRA available
functions, and your choices of multiple bells & numerous
horns to give “life” to your DCC N-Scale
loco’s. MRC makes
available a choice of (33) horns, eight-bells, brakes,
air releases, pop
valves,
cooling
fans, coupling
sounds and more. Directional lighting is
included too… to
give “life” to your Kato N-Scale loco’s.
- We
haven’t forgotten power pack users! MRC’s
sound decoders are dual-mode decoders so DC railroaders
can get brilliantly synchronized diesel rumble sounds
on their layout as well. Requires "Black Box" shown
below for non-DCC layouts.
|
Plug
'n Play Sound Board for Kato GE AC-4400 and EMD SD70
MAC's
Important: This does not fit Kato's SD70ACe's |
Plug
'n Play Sound Board for Kato P-42 Genesis. Also
fits Kato E8's! |
MRC
1658 is discontinued. Click on photo above for new
decoder |
New
Plug 'n Play Sound Board for Kato SD40-2 |
New
Plug 'n Play Sound Board for Kato SD-80/90 MACS |
New
Plug 'n Play Sound Board for Kato F40PH Click on photo
above for F40PH listing of available locos from Kato. |
Synchronized
Diesel Sound Decoder for Atlas Diesels |
- Synchronized diesel prime mover with randomly
associated locomotive sounds
- User selectable 15 different horns and 8 bells
- 19 accessory functions allowing more sound control
- Programmable individual sound volumes
- 0.75 amp capacity
- Programmable start voltage, acceleration and deceleration
rate, top voltage and 14,28, 128 speed steps
- Selectable factory default speed curve
- Directional lighting (FO) at 0.2 amp rate
- Supports advanced consisting (CV19) and programming on
the main (OPS mode)
- Compatible with NMRA DCC standards
- Complies with Part 15 of FCC
- 13x18 speaker included
- Directly replaces most Atlas N scale loco's PC Boards
|
| N
Scale Steam Power Sound Decoders |
|
|
- Synchronized
steam chuff with random sounds
- 12
selectable chuff sounds (4 regular/4 articulated)
- User
selectable 12 different whistles and 4 bells
- 1.0
amp capacity
- Programmable
individual sound volumes
- Programmable
for either 2-digit (1-127) or 4-digit (1-9999) addresses
- Programmable
start voltage, acceleration and deceleration rate,
top voltage and 14,28,128 speed steps
- Selectable
factory default speed curve
- Directional
lighting control for front and rear lights at 0.2 amp
rate
- Programmable
chuff rate and chuff starting point
- Compatible
with NMRA DCC standards
- Complies
with the part 15 of FCC
- 17mm
speaker included
|
Are
Loco Sounds Only For DCC Guys? …Not Anymore!
- It
can be used in analog DC with any NMRA compatible
dual mode decoder, eg: BLI/QSI, Atlas, Life-Like,
Athearn, MTH, Precision Craft, etc.
- Instead
of having to buy a control box from every company
to operate only their locomotive, this can operate
them all. so all you need is just one box.
- It
operates all the sound functions that the particular
loco has inside of it.
- It
is a very simple 4-wire hook-up - two wires to your
DC powerpack's variable output, and two wires to
the track.
- If
you use non-decoder equipped locos the BlackBox must
be removed from the powerpack to run them.
- The
BlackBox can be used in a layout with block control,
[cab A/cab B], as one of the cabs so you can run
sound loco's on one cab, and normal DCC locos on
the other.
|
Sound
without DCC!
If
you are not using
DCC -- this is for you!
If
you are using DCC -- you don't need it!
|
|
| N
Scale Drop-In DCC Decoders w/Out Sound |
- MRC
has launched a new series of N Scale DCC Drop-In installation
decoders without Sound. These have
1.0 amp capacity and will work with all NMRA compatible
DCC Systems.
- Directly
replaces original PC board.
- Programmable
start voltage, acceleration and deceleration rates.
The Decoders in the series listed below are Without Sound!
|
|
|
|
|
NCE
Decoders
|
TCS
Decoders
|
|
|
Home
Page 
.GIF)